Barbed Tee, 1/4 In., 10-pk.

The 1/4 in. Barbed Tee connects three sections of 1/4 in. supply tubing or dripline for a "T" intersection. It also connects two 1/4 in. branches to a punched hole in any size supply line. To install, insert the single-barbed tee inside the drip tubing opening and anchor in place (Tip: soften the tubing end so it's easier to work with by soaking in hot water or leaving out in the sun for pliability.) Use fittings to set up a new drip system or expand or repair an existing system. Reusable micro fittings are made of acrylonitrile butadiene styrene (ABS).

• Connect three sections of 1/4 in. supply tubing or dripline for a "T" intersection, or add two branches of 1/4 in. tubing or dripline from a 1/2 in., 5/8 in., or 0.710 in. supply line; Works in a variety of areas, from small to large, flat or sloped; tran
• Fits ¼ in. tubing or dripline with internal diameter of 0.170 in. or punched hole with diameter of 0.170 in.
• Insert barbed end into the drip tubing opening and anchor it in place. (Tip: soften the tubing end so it's easier to work with by soaking in hot water or leaving out in the sun for pliability).; Single-barbed fitting inserts into drip tubing and anchors i
• Handles water pressures up to 50 psi; Works with Raindrip products and other products with compatible connection type
• ¼ in. barbed tees come in a pack of 10; Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling